Table of Contents
Advertisement
The colors of the time bar are different, depending on the recording mode.
No color
- NONE
"NONE" means there is no recorded video for that time slot.
Red color
- Instant recording
Yellow color
- Continuous recording
Green color
- Motion-detection recording
In this mode, the system records only when motion is detected
The motion-recording configuration can be set in the camera menu from the NVR directly, or from
the network camera configuration.
Orange color
- Sensor-activated recording
In sensor mode, the system will record when a sensor is triggered during the dwell time as set in
"SENSOR" of the "ALARM" menu. Sensor input can be selected between camera input sensor and
NVR input sensor. NVR input sensor is a direct alarm input to the NVR physically and a Camera
input sensor is triggered by network. The user should verify if the specific network camera is
integrated with the NVR to the manufacturer.
Pink color
- Motion detection + Sensor-activated recording
The system does not record without motion and sensor event. Motion event data comes from the
network camera and can be set in "Camera" in "DEVICE" menu. This menu is for integrated network
camera settings and sensor type need to included in "Sensor" in "ALARM" menu.
If user sets "OFF" in both "MOTION" and "SENSOR" in the "DEVICE" menu, then the system will
neither record nor notify the Advanced Client Software or Central Management System.
Light Blue color
- Continuous + Motion recording
In this mode, the system records with the continuous recording mode settings when no motion is
detected. However, if motion is detected, the system will start recording with the motion recording
mode settings.
During continuous recording mode, the system records with 1 frame per second. When motion
recording mode is activated, the system will follow the camera setting value which the user can set in
the record setup menu.
*Record Setup is available only for approved camera models.
User's Manual | 26
Advertisement
Table of Contents
