Icons Description - Nuvico np p402 User Manual

3.3.3 Icons Description

The live mode displays icons or messages on the screen to indicate the system mode or status.
Below are the icon categories that are indicated on the monitor.
Icon to be shown
at Left-upper corner on each channel screen
Continuous Recording
Motion Detection Recording
Sensor Activating Recording
Motion Detection + Sensor Activating
Recording
Instant Recording (Emergency Rec)
Continuous Recording + Motion Recording
The sliding menu for display will appear when the mouse cursor is moved to the bottom of the display and right clicking the
mouse enables to a pop-up for menu access.
means "Instant (emergency) recording", which is useful to urgently start recording. In emergency recording, the system
follows the instant record settings. The default settings for instant record are maximum performance recording of streaming
from IP camera and applied for all channels.
means "PTZ" mode, which is useful to instantly switch to PTZ control. In PTZ mode, user can move pan/tilt and
zoom-in/out by moving the mouse pointer, like a virtual joystick.
User can click the right-forwarded arrow button
means the HDD usage percentage by video recording. If it shows 60%, then 60% of HDD space has been used up
for recording.
N
OTE If you cannot find any colored-mark in the top right corner of the live screen mode, then it means that the
system does not record any image. In this case, you need to check recording schedule or camera of the
main setup menu.
at Left-bottom corner on full screen.
Sequence display on
Digital zoom on
Audio Channel
to automatically playback the latest video clip.
User's Manual | 14
Icon to be shown