Nuvico np p402 User Manual page 36

In "DATE/TIME SET," user can activate DST (Daylight Saving Time). Select the time synchronization server and other basic
settings like time zone/time format.
N
OTE There are two types of TIME SYNC MODE.
1) NVR as NTP Server mode
The operating NVR is set as a Time Sync Server, which can synchronize the time clock of another
NVR(s) connected over the same network environment.
2) NVR as NTP Client Mode
The operating NVR is set as one of the client NVR(s). Input the IP No of designated NVR, Advanced
Client Software (ACS), or Central Management System (CMS), as a Time Sync Server in "SYNC
SERVER"; and then its time clock is synchronized with Time Sync Server by the setup time in "SYNC
CYCLE".
Remote ID: users must setup the Remote ID to match the ID setting in the IR remote controller in order for the remote to
function.
Upgrade: Users can easily upgrade the system in "Upgrade" menu via USB/FTP server, upon the selection as shown below:
User's Manual | 34