Nuvico np p402 User Manual page 37

35 | FULL HD Network Video Recorder
P
ROCEDURE How to upgrade system firmware by using USB memory stick
1) Insert the USB thumb-drive formatted by FAT32 in any USB port of NVR (compatible with USB
2) Once the system detects the thumb-drive, the user will see its brand or model name in the
3) Click "OK" to confirm.
How to upgrade system firmware by using FTP server
1) Select FTP in the drop-down list and type a given IP address in the Host Address (FTP server IP
address) field. Username and password is "none" (Default). *The FTP server address is subject to
change without a prior notice.
2) Click 'Check' button then NVR will detect the latest Firmware version from the FTP server. If
there is a new firmware, the NVR will ask you whether you want to upgrade it or not.
3) Click 'OK' to confirm it and then click 'START' to start upgrading.
C
AUTION It is recommended to format the HDD after finishing the firmware upgrade because the data recorded
by previous firmware may cause a malfunction of the NVR due to different a format.
It is possible to send the system firmware back to factory default. This may be useful if functionality
takes a step backwards after a system upgrade. It is highly recommended to check all functions and
menus after a firmware upgrade for proper layout and performance.
In "Display Setting", the user can set OSD information display in Live & Playback mode and Dwell time of set-up display, OSD
and Sequence.
Transparency is the transparency level of the menu screen. 0% means no transparency at all.
N
OTE NVRs support the following video resolutions: 640x360, 1280x720, 1280x1024, 1920x1080
User must set the proper resolution according to the monitor resolution.
Default HDMI resolution is set to 1024x768. Depends on resolution of monitor, it is recommended to
change resolution to 1920x1080.
2.0)
"DEVICE" field after pressing the "SCAN" button.