Table of Contents
Advertisement
19 | FULL HD Network Video Recorder
N
User will see numeric pad to select "Preset" number. The preset is defined by setting a PTZ protocol in the
OTE
setting menu. The maximum number of preset is 255, but the max supported by the PTZ may be less.
User can automatically switch the PTZ camera positions according to the predefined preset settings by using GUARD TOUR
function. The connected PTZ camera must support touring functions. "GUARD TOUR" on the pop-up menu can be enabled
after the channel that the PTZ camera is connected to is changed to full screen. Please make sure that PTZ camera setting is
correct, otherwise, "GUARD TOUR" is shown as disabled.
C
AUTION
Depending on PTZ camera, some preset positions might be skipped if, for example, the PTZ camera
cannot mechanically move or control focus within the interval time required by the NVR. In this case, it
is recommended to increase the interval setting to a value that allows for the cameras to finish its Pan
& Tilt.
Advertisement
Table of Contents
