Table of Contents
Advertisement
MEITRACK MVT380 User Guide
More SMS commands
You can configure the MVT380 on a mobile phone or on a computer by using Meitrack Manager. For details, see section 6.5
"Configured on a Computer."
Note:
1.
The default password is 0000. You can change the password by using Meitrack Manager and SMS commands. For details,
see section 6.5 "Configured on a Computer."
2.
The MVT380 can be configured by SMS commands with a correct password. After an authorized phone number is set,
only the authorized phone number can receive an SMS report.
6.4.1 Setting a Combined Function Phone Number – A71
SMS sending: 0000,A71,Phone number 1,Phone number 2,Phone number 3
SMS Responding: IMEI,A71,OK
Description:
A phone number has a maximum of 16 bytes. Phone numbers are empty by default.
Set phone number 1 to an SOS phone number. When the tracker is called by using the phone number, a location SMS,
geo-fence alarm, and low power alarm are received.
If all combined function phone numbers need to be deleted, send 0000,A71.
When the SOS button is pressed, the tracker dials phone numbers 1, 2, and 3 in sequence. The tracker stops dialing when a
phone number responds.
Example: 0000,A71,13811111111,13822222222,13833333333
Responding: 353358017784062,A71,OK
6.4.2 Setting a Listen-in Phone Number – A72
SMS sending: 0000,A72,Listen-in phone number 1,Listen-in phone number 2
SMS Responding: IMEI,A72,OK
Description:
When the authorized listen-in phone number is used to dial the tracker, the tracker answers the call automatically and enters
the listen-in state. In this way, the tracker makes no noise.
A maximum of two phone numbers can be set. One phone number has a maximum of 16 digits. Phone numbers are empty by
default.
If no phone number is entered, remain commas and delete related phone numbers.
If all phone numbers need to be deleted, send 0000,A72.
Example: 0000,A72,13844444444,13855555555
Responding: 353358017784062,A72,OK
6.4.3 Setting the Smart Sleep Mode – A73
SMS sending: 0000,A73,Sleep level
SMS Responding: IMEI,A73,OK
Description:
When the sleep level is 0 (default value), disable the sleep mode. When the sleep level is 1, the tracker enters the general sleep
mode. The GSM module always works, and the GPS module occasionally enters the sleep mode. The tracker works 25% longer
in the general sleep mode than that in the normal working mode. The mode is not recommended for users who set the
scheduled tracking in a short interval. In this way, the mode will affect trace integrity.
Copyright © 2015 Meitrack Group All rights reserved.
- 9 -
Advertisement
Table of Contents
