Setting A Combined Function Phone Number - A71; Setting A Listen-In Phone Number - A72 - MeiTrack TC68S User Manual

MEITRACK TC68S User Guide
More SMS commands
You can configure the device on a mobile phone or on a computer by using Meitrack Manager. For details, see section 5.5
"Configured on a Computer."
Note:
1. The default password is 0000. You can change the password by using Meitrack Manager and SMS commands. For details,
see section 5.5 "Configured on a Computer."
2. The device can be configured by SMS commands with a correct password. After an authorized phone number is set, only
the authorized phone number can receive the preset SMS report.
5.4.1 Setting a Combined Function Phone Number – A71
SMS sending: 0000,A71,Phone number 1,Phone number 2,Phone number 3
SMS Responding: IMEI,A71,OK
Description:
A phone number has a maximum of 16 bytes. If no phone numbers are set, leave them blank. Phone numbers are empty by
default.
Phone number 1: Set phone number 1 to an SOS phone number. When you call the tracker by using the phone number, the
tracker will reply an SMS with the location and send geo-fence alarms and low power alarms.
Phone number 2/3: When you call the tracker, it will reply an SMS with the location.
If all combined function phone numbers need to be deleted, send 0000,A71.
When the SOS button is pressed, the tracker dials phone numbers 1, 2, and 3 in sequence. The tracker stops dialing when a
phone number responds, and will send alarm information to phone number 1.
Example: 0000,A71,13811111111,13822222222,13833333333
Responding: 353358017784062,A71,OK
5.4.2 Setting a Listen-in Phone Number – A72
SMS sending: 0000,A72,Listen-in phone number 1,Listen-in phone number 2
SMS Responding: IMEI,A72,OK
Description:
When you call the tracker by using the authorized listen-in phone number, the tracker will answer the call automatically and
enter the listen-in state. In this way, the tracker will not make any sound.
Copyright © 2015 Meitrack Group All rights reserved. - 10 -