Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MeiTrack MVT380
Summary of Contents for MeiTrack MVT380
- Page 1 MEITRACK MVT380 User Guide MEITRACK MVT380 User Guide...
- Page 2 Change History File Name MEITRACK MVT380 User Guide Created By Kyle Lv Creation Date 2010-08-24 Project MVT380 Update Date 2015-09-25 Subproject User Guide Total Pages Version V3.3 Confidential External Documentation Copyright © 2015 Meitrack Group All rights reserved. - 2 -...
-
Page 3: Table Of Contents
3.1.3 Other Functions ...............................- 5 - 3.1.4 Functions of Optional Accessories ...........................- 5 - 3.2 Specifications ..................................- 5 - 4 MVT380 and Accessories ................................- 6 - 5 Appearance....................................- 6 - 6 First Use ......................................- 6 - 6.1 Installing the SIM Card ................................- 6 - 6.2 Charging ....................................- 7 -... -
Page 4: Copyright And Disclaimer
The user manual may be changed without notice. Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording. -
Page 5: Other Functions
-161 dB Positioning accuracy 5 digital inputs (3 negative inputs and 2 positive inputs) 2 analog detection inputs I/O port 5 outputs 1 USB port 1 loudspeaker or microphone port Copyright © 2015 Meitrack Group All rights reserved. - 5 -... -
Page 6: Mvt380 And Accessories
6.1 Installing the SIM Card To install the SIM card, perform the following operations: Loosen the screw, and remove the front cover of the MVT380. Insert the SIM card into the card slot with its gold-plated contacts facing towards the Printed Circuit Board (PCB). -
Page 7: Charging
6.2 Charging When you use the MVT380 for the first time, connect the MVT380 GND (-Black) and Power (+Red) wires to 12 V or 24 V external power supply for charging. Ensure that the MVT380 is charged at least three hours. Eight hours are recommended. -
Page 8: Tracking By Mobile Phone
6.5 Tracking by Mobile Phone Call or send the 0000,A00 command by SMS to the MVT380 SIM card number. The device will reply an SMS with a map link. Click the SMS link. The location will be displayed on Google Maps on your mobile phone. -
Page 9: Common Sms Commands
When the SOS button is pressed, the tracker dials phone numbers 1, 2, and 3 in sequence. The tracker stops dialing when a phone number responds. Example: 0000,A71,13811111111,13822222222,13833333333 Reply: 353358017784062,A71,OK Copyright © 2015 Meitrack Group All rights reserved. - 9 -... -
Page 10: Setting A Listen-In Phone Number - A72
Visit http://ms03.trackingmate.com, enter the user name and password, and log in to the MS03. (Purchase the login account from your provider.) For more information about how to add a tracker, see the MEITRACK GPS Tracking System MS03 User Guide (chapter 4 "Getting Started"). -
Page 11: Installing The Mvt380
View various reports. Send commands in batches. Support OTA updates. For details, see the MEITRACK GPS Tracking System MS03 User Guide. 8 Installing the MVT380 8.1 Installing GPS and GSM Antennas GSM antenna GPS antenna Connect the GSM antenna to the connector which is labeled "GSM". The GSM antenna is non-directional, so you can hide it in any place of a vehicle. - Page 12 Maximum current for output low voltage (valid): 500 mA Connect to an external relay to remotely cut off the vehicle fuel cable or engine power supply. Output 5 13 (OUT5) Yellow Valid: low level (0 V) Copyright © 2015 Meitrack Group All rights reserved. - 12 -...
-
Page 13: Power Cable/Ground Wire (Pin 7/8)
8.2.1 Power Cable/Ground Wire (Pin 7/8) Connect the power cable (red) and ground wire (black) to the positive and negative electrodes of the vehicle battery respectively. 8.2.2 Digital Input (Pin 1/2/3, Negative Trigger) Copyright © 2015 Meitrack Group All rights reserved. - 13 -... -
Page 14: Digital Input (Pin 4/5, Positive Trigger)
8.2.6 Analog Input (Pin 6/14) The AD analog input can connect to a sensor whose output voltage ranges from 0 V to 6.6 V. AD analog voltage = (AD x 3 x 2)/1024 Copyright © 2015 Meitrack Group All rights reserved. - 14 -... -
Page 15: Optional) Installing The Microphone And Loudspeaker
8.3 (Optional) Installing the Microphone and Loudspeaker 8.4 Mounting the MVT380 Tighten the four screws shown in the following figure. If you have any questions, do not hesitate to email us at info@meitrack.com. Copyright © 2015 Meitrack Group All rights reserved. - 15 -...