Overview Of The Menu Structure - GE 40 User Manual

32

Overview of the menu structure

The TVR 40 has an icon driven menu structure that allows you to configure the unit's parameters.
Figure 15 below shows the TVR 40 main menu screen. Each icon symbolizes the content of the
submenu. The menu icon selected has a white action frame around it.
Many of the submenus are only available to privileged users, such as the system administrator.
You must be in live mode to access the menu mode where you can setup or change the TVR 40
settings in menu mode.
Figure 15: The TVR 40 main menu
Action frame
Table 5: Description of the eight menu icons
Menu icon
Display
Cameras
Recording
Network
Alarms
PTZ
User
System
Description
Configure the bus address, login PIN request, menu timeout, video standard, VGA, time and
date, and multiscreen.
See "Display settings" on page 36.
Configure the camera titles, video adjustment, advanced camera settings, time and date
position, and motion detection.
See "Camera settings" on page 44.
Configure the recording mode, e-SATA, image resolution, recording rates, bits rates, and pre
and post recording settings.
See "Recording settings" on page 58.
Configure the standard network settings, e-mail, and advanced network settings.
See "Network settings" on page 66.
Configure the alarm input type, alarm rules, alarm output type, PTZ linkage, notification
settings.
See "Alarm settings" on page 75.
Configure the RS-485, PTZ protocols, and PTZ addresses. Comprehensive configuration of GE
domes, and basic setup of non-GE devices.
See "PTZ settings" on page 81.
Configure user rights.
See "User settings" on page 87.
Configure the RS-232. Manage firmware upgrade, and HHD. View log and system view.
Acknowledge alarms, reboot the DVR, and power off.
See "System settings" on page 93
TruVision DVR 40 User Manual