Table of Contents
Advertisement
Problem
No or bad signal.
Bad picture / Blocking error.
Signal is good. But No picture and
no audio on decoding output
Cannot have access to the IRD
through WEB UI
Possible Reasons
No cable connection or the
program does not exist in
current satellite.
The satellite dish is not
properly oriented to the
satellite.
The satellite dish is not
properly oriented to the
satellite.
Signal is too strong.
Signal is too weak.
LNB noise figure is too
high.
The LNB is defective
The picture and audio are
scrambled.
IP setting
50
What to do
Check the cable
connections, LNB and
other equipment
connected between the
LNB and the STB, and /or
adjust the dish.
Align the dish. Check the
signal level in the IRD
menu.
Align the dish.
Connect a signal
attenuator to the LNB
input.
Change to a larger dish.
Change a LNB with lower
noise figure.
Change a LNB.
Insert correct CAM and
authorized smart card to
descramble the programs.
Check whether the
management PC IP and
the IRD IP have been set
to be in same section.
Hide quick links:
Advertisement
Table of Contents
