Enable: Enable or disable corresponding output channel
Dest IP Address: The IP address for the multicast/unicast.
Dest Port: The port of the multicast/unicast, it must stay same with the value
of the dest device.
Protocol: You can choose UDP OR RTP for multicast/unicast.
Time to Live: Range is 1-255. (Num 8 is recommended)
Constant Rate: to set the value of IP stream rate.
Enable Dest MAC: You can deceide whether to set the MAC of destination
device.
3.4.2.9 CA ( For UMH 160R-BASE/ UMH 160R-L/ UMH 160R-SDI)
In this page, user can manage the configuration setting related to the device decryption and
descrambling capability.
COMMON INTERFACE is used to interface between the pay-per-view card and
the receiver. This is a defined standard that enables the addition of Conditional
Access Module (CAM) in a DTV receiver to adapt it to different kinds of
cryptography.
PIC-3.4-31
PIC-3.4-32
38