Connection Diagram (For UMH 106R-AD)
In actual application, not all connection interfaces need to be connected with
signal/external devices. Please connect according to actual application purpose.
To ensure a smooth communication between the management PC and the
IRD, please try to connect the IRD management port to a switch without large data
processing.
2.4.1 Connection Setup for RF Signal Input
Connect signal to tuner input (either RF1 or RF2 input) with a RF cable.
Connect the IRD "Management" port to a switch, set up a management network with
the management PC.
Connect the IRD with the monitor via HDMI, SDI or CVBS ports.
2.4.2 Connection Setup for ASI signal input
Connect ASI signal to IRD "ASI IN" port with a BNC cable.
Connect the IRD "Management" port to a switch, set up a management network with
the management PC.
Connect the IRD with the monitor via HDMI, SDI or CVBS ports.
PIC-2.4-2
12