Wellav UMH160R User Manual page 26

1
① Input Program Configuration:The "Input Program Configuration" is on the left side
of the window. It displays all the information input module and the received input streams
② Output Program Configuration:In the "Output Program Configuration" window, it
shows the ports which can be set to transmit output stream. The programs set to be
outputted are shown in the submenu of each port.
③ Operation Buttons: This area contains four function button: Refresh, Apply, Save
and ClearAll. These four buttons are used to make the configuration in to effect.
Refresh: by clicking this button to refresh the programs information.
Apply: to validate the configuration of the programs, but it can't provide save
function.
Save: to validate and save the configuration of the programs.
ClearAll: to clear all the configuration of programs and TS.
How to dispose the input programs:
To get the input programs, you should choose the port that is connected with input streams
and right click the TS. Then you will get the pop-up operation menu, right click the
corresponding item and it will scan the port automatically.
3
PIC-3.4-9
25
2