The decoder output video resolution should meet with the monitor resolution
setting to avoid and display issue.
Audio:
In this section, you can configure the information of Audio, as follows:
o AUDIO Volume: Set the output audio level from 0 to max. 49.
o Mixer: Shows the format of audio, including Stereo, Left, Right, Mono and
Dual.
ASI
Here, you are able to set the output rate of ASI signal. After configuration you need to click
submit button to enforce it.
IP
This is the main parameter of output IP streams. There are two channels for output and you
can set both of them.
PIC-3.4-29
PIC-3.4-30
37