Operation Guide; Operation Overview; Powering Up And Initialization; Front Panel Operation - Wellav UMH160R User Manual

3 Operation Guide

3.1. Operation Overview

This chapter provides information on how to operate the IRD through front panel and WEB
UI. User can select the most proper operation method to set up the unit.

3.2. Powering Up and Initialization

Before powering-up the device, make sure that all cabling is correctly
connected (refer to chapter 3.4 of this manual). The device is correctly connected to
the power inlet and grounded.
Switch on the equipment through the rear power switch, and the unit is powered up and
starts the initialization.
The LCD screen is lighted up, and display information as following:
The initialization takes about 20 seconds to complete, and then the IRD shows the IP
address information as following:
If the unit fails to initialize and hangs at the "booting" stage, swtiching off the
device and then powering up again may help. If the device still fails to initialize,
please contact your service representative for help.

3.3. Front Panel Operation

Ways of operation: use the 6 navigation keys on front panel: Up / Down / Left / Right / Menu /
UMH160R IRD
Booting...
UMH160R IRD
IP: 192.168.001.016
14