LocalSetup
In this page, you are able to configure the following parameters:
IP ADDRESS: Local IP setting for connecting to the server. This IP and the
management server's IP should be in the same section.
Network MASK: Network Mask setting for connecting to the server. It should
be the same as management server: 255.255.255.0
GATEWAY: Gateway setting for connecting to the server. It should be the
same as the management server.
TRAP IP ADDRESS: This IP should be the same as the monitoring server's IP.
After correct setup, the IRD will pass the alarming and running information to
the monitoring server.
MAC ADDRESS: Here shows the MAC address of the device. The MAC
address is fixed and not editable.
Properties ( For UMH 160R-AD)
This page shows the software version and firmware version.
PIC-3.4-33
PIC-3.4-34
40