Preparation Before Officially Operation - Wellav UMH160R User Manual

module and authorized smart card.
c. The descrambled picture can be seen via the monitor.
The configuration of IRD:
The items need to be checked are listed in the following table.
Items
Front Panel Modification
Modification through WEB
Verification Result
The selected programs are displayed on the monitor after setting. It means the decoding is
working fine.

3.6. Preparation before Officially Operation

This section advises what need to be performed on the IRD before formally starts operation.
It includes but not limited to the following:
 Clear test data
 Configure the equipment with working data.
 Routing inspection.
Method
Outputs->Program
program)
(Select the program which needs to be descrambled
from Program List. Select CI Slot1or CI Slot2
according to which CI ports the CAM module and
CAM Card is inserted.)
Outputs->Decoder Setup menu
(Select the programs that need decoding output, and
then choose Output->Decoder Setup->Audio menu
and Output->Decoder Setup->Video menu to set
decoding resolution, aspect ratio, output mode etc.
Outputs->Decoder Setup page
(Refer to Figure 3.4 of this manual)
47
Setup menu (for scrambled