Wellav UMH160R User Manual page 32

parameter from the satellite program provider.
 SYMBOL RATE (KBaud): every transponder has one symbol rate; you can
get this parameter from the satellite program provider.
 LNB LO. Frequency: this is the LNB's local oscillation (LO) frequency,
every LNB have one or two oscillation frequencies which can be obtained
from the LNB provider, or you can check on the LNB label. The value is
between 5000 and 6000.
 LNB Power Supply: LNB voltage is the power that supply to the LNB in
order to receive satellite signal with different polarization. Generally 18V is
for Horizontal while 13V is for Vertical.
 LNB 22 KHz: Generally this is used to control 22KHz switch, typically used
for LNB with double L.O. in Ku band. "ON" is for high L.O and "OFF" is for
low L.O.
Sometimes the parameters may change; it is advisable to check through
www.lyngsat.com

IP
for the updated satellite parameters.
PIC-3.4-20
31