Verification Result
Once the signal source is properly connected and the parameters based on the input is
accurately configured, front panel LOCK indicator will lights up in GREEN, indicating that the
signal reception is normal.
3.5.2
Descrambling Function Verification
Precondition:
Scrambled satellite signal or test stream are available.
a.
The smart card has already been authorized.
b.
Corresponding CAM for the test signal/stream is available.
c.
The descrambled picture can be seen via monitors.
d.
The configuration of the device:
The items need to be checked are listed in the following table.
Items
Front Panel Modification
Modification through WEB
Verification Result
If the scrambled programs can be seen on the monitor after descrambling setting, then it
verifies the IRD descrambling function works well.
3.5.3
Decoding Function Verification
Precondition:
a.
The input signal is available and well fed to the input ports.
b.
The scrambled satellite signal and code streams are dealt with correct CAM
Method
Outputs->Program Setup menu
(Select the program which needs to be descrambled
from Program List. Select CI Slot1or CI Slot2 according
to which CI ports the CAM module and CAM Card is
inserted.)
Select "Outputs->Program Setup" page
(Refer to Figure 3.4 of this manual)
46