Wellav UMH160R User Manual page 27

After completing the scan, all the input programs of that port will be scanned and displayed
as follows:
How to configure the output programs:
Firstly, select the port which you want to transmit the output stream. Right click the TS in that
port and a pop-up menu will appear. Click "ADD TS" item and you will get the input box.
Secondly, Input the "Original Network ID" and "TS ID" for the channel, and click the "OK"
PIC-3.4-10
PIC-3.4-11
PIC-3.4-12
26