d
Item
e
Next
f
Item
g
Store to save the setting.
h
Quit to exit the functions menu.
Removing the Tractor 2 Feeder
To remove the Tractor 2 Feeder and load continuous forms on the normal
tractor feeder:
1
Turn the PC and the printer Off and unplug both.
2
If continuous forms are loaded on the Tractor 2 Feeder, remove the
continuous forms.
3
Press down on the tabs on both sides of the Tractor 2 Feeder. While
holding the tabs down, pull the Tractor 2 Feeder straight out of the
printer.
4
Load continuous forms on the normal tractor feeder. For help, see "To
load continuous forms:" on page 63.
until Tractor appears.
.
until Tractor 2 appears.
Tab
Tab
Chapter 5: Printer Options
99