Unloading Forms - IBM 102 User Manual

Unloading Forms

To unload forms from the F2 forms device, follow these steps:
1. Open the acoustic cover.
2. Tear off the forms at the tear bar. See "Adjusting the Tear-off
Position" on page 1-79 for the procedure.
3. Press Stop.
The printer displays
NOT READY
4. Open the front paper door as follows:
a. Pull the door up until it will not go any higher.
b. Push the door back slightly to lock it in the open position.
P a p e r D o o r
1-84
User's Guide
<A>