IBM 102 User Manual page 36

4. Turn the power On (|).
Note: Do not turn the printer power Off (O) during setup unless
instructed to do so.
The printer does the following:
a. All indicators and blocks on the display light, and the alarm
beeps. Then the printer displays
The printer then displays
DIAGNOSTICS IN PROGRESS
b. The print head and ribbon move.
c. The printer displays
Calibrating Printer
Please Wait
and then
DIAGNOSTICS COMPLETE
followed by
1 END OF FORMS
LOAD FORMS
The Attention indicator also blinks and the alarm beeps.
This status code appears because forms have not been
loaded.
1-14
User's Guide
<A>
<A>
<A>