Preparing To Load Forms; Forms - IBM 102 User Manual

Preparing to Load Forms

To prepare to load forms in the F1 forms device, follow these steps:
1. Slide the print head to the far left side of the printer.
2. Loosen the blue forms tension knob by turning it
counterclockwise, and then move the blue forms tension knob
towards the bottom of the printer until you see the
number 1.
Note: Moving the blue forms tension knob to the
lets you load forms.
3. Unlock the blue locking lever on the right tractor. Slide the
tractor to the extreme right.
1-24
User's Guide
below the
*
B lu e F o rm s
Te n s i o n K n o b
position
*
B lu e L o c k in g L e v e r