Using The Acoustic Cover; Removing The Acoustic Cover; Reinstalling The Acoustic Cover - IBM 102 User Manual

Using the Acoustic Cover

The following sections describe how to remove and reinstall the
acoustic cover.

Removing the Acoustic Cover

If you need to remove the acoustic cover for any reason from the
paper exit area, follow these steps:
1. Pivot the acoustic cover open until it is vertical.
2. Locate the latch release tabs on both brackets.
3. Depress the latch tabs while lifting the acoustic cover.

Reinstalling the Acoustic Cover

To reinstall the acoustic cover over the paper exit area, follow these
steps:
Note: The figure in this section shows the rear of the printer.
1. Locate the slots near the paper exit area of the access cover.
B r a c k e t
S lot
L a tc h
B r a c k e t
Rear View
Chapter 1. Setting Up the 4230 Printer
L a tc h
S lot
1-117