Adjusting The Top Of Form Position - IBM 102 User Manual

Adjusting the Top of Form Position

The Micro and Micro
time you press these keys, the printer moves the form in 0.355 mm
(0.014 in.) increments.
Note: If you use the Micro , Micro , or Line Feed keys to adjust
the print position, you may need to reprint the page.
Open the access cover. Then open the front paper door as follows:
1. Pull the door up until it will not go any higher.
2. Push the door back slightly to lock it in the open position.
P a p e r D o o r
Next load forms, if necessary (see "Loading Forms in the F2 Forms
Device" on page 1-60 for more information). Complete the following
steps to make fine vertical adjustments to the top of form position.
To set the top of form position, follow these steps:
1. Press Stop.
The printer displays
NOT READY
keys control fine vertical movement. Each
A c c e s s C o v e r
<A>
Chapter 1. Setting Up the 4230 Printer
1-77