Table of Contents
Advertisement
Proceed as follows to prepare the PC for the vertical operating position:
Disconnect the cables.
Assemble the base feet in the direction of the arrow.
Set up the casing in a vertical position so that the holes provided for the screws (on the side of the
device) are facing upwards.
Fix the base feet with the supplied screws (1). One screw is provided per each foot and opening.
1
Place the unit on the base feet and reconnect any cables disconnected previously.
Horizontal operating position
You may operate the device in a horizontal position with rubber / plastic feet or with base feet.
4
1
Advertisement
Table of Contents
