Table of Contents
Advertisement
Power cable not connected
Switch off the monitor and the PC.
Check that the monitor power cable is properly connected to the monitor and, depending on the
connector, to the PC or to a grounded mains outlet.
Check that the PC power cable is properly plugged into the PC and grounded mains outlet.
Switch on the monitor and the PC.
Monitor cable not connected
Switch off the monitor and the PC.
Check that the monitor cable is properly connected to the PC and monitor.
Switch on the monitor and the PC.
Wrong monitor has been set under Windows 2000
Restart the PC.
If the message Starting Windows appears, press function key [F8].
The Windows 2000 Advanced Options Menu appears.
Select Safe Mode or Safe Mode with Network.
Set the correct values for the attached monitor as described in the operating manual of the monitor
by selecting Start - Settings - Control Panel - Display - Settings.
Wrong monitor has been set under Window XP
Restart the PC.
Press [F8] while the system is booting.
Either the Windows Advanced Start Options menu or the menu for selecting the operating system
appears.
If the menu for selecting the operating system appears, press [F8].
Select Safe Mode or Safe Mode with Network.
Set the correct values for the attached monitor as described in the operating manual of the monitor
by selecting Start → Settings → Control Panel → Display → and then the Appearance, Themes,
Settings tabls.
The wrong RAM modules have been inserted
See the technical manual for the mainboard for information on which memory modules can be used.
30
Advertisement
Table of Contents
