Table of Contents
Advertisement
[OFF]: You can set the black level of the output
signal to the standard level.
[ON]: You can raise the standard black level.
Use this when the picture becomes too black.
x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
You can select the picture in pause mode.
[AUTO]: The picture, including subjects that
move dynamically, is output with no jitter.
Normally select this position.
[FRAME]: The picture, including subjects that
do not move dynamically, is output in high
resolution.
Settings for the HDMI
[HDMI SETUP]
HDMI SETUP
HDMI RESOLUTION:
CONTROL FOR HDMI:
VOLUME LIMIT:
YC
AUDIO(HDMI):
JPEG RESOLUTION:
x [HDMI RESOLUTION]
You can select the type of video signal that is
output from the HDMI OUT jack. For details,
see "To select the type of video signal output
from the HDMI OUT jack" (page 35).
[AUTO (1920
the optimal video signal for the connected TV.
[1920
1080i]: The system outputs 1920 ×
×
1080i* video signals.
[1280
720p]: The system outputs 1280 ×
×
720p* video signals.
[720
480/576p]**: The system outputs 720 ×
×
480p* or 720 × 576p* video signals.
* i: interlace, p: progressive
** Depending on the country model, [720 × 480p] may
appear.
92
GB
AUTO
C
/RGB(HDMI):
B
R
1080p)]: The system outputs
×
x [CONTROL FOR HDMI]
You can set the [CONTROL FOR HDMI]
function to on/off. This function is available
when you connect the system and TV with an
HDMI cable. For details, see "Using the Control
for HDMI Function for "BRAVIA" Sync"
(page 66).
[OFF]: Off.
[ON]: On. You can operate mutually between
components that are connected with an HDMI
cable.
Note
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection.]
appears and you cannot set to [ON].
x [VOLUME LIMIT]
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATER/THEATRE, the System Audio
Control (page 68) is activated and loud sound
(1920x1080p)
may be output depending on the volume level of
OFF
LEVEL2
the system. You can prevent this by limiting the
YC
C
B
R
maximum level of the volume.
OFF
SD
[LEVEL3]: Maximum volume level is set to 15.
[LEVEL2]: Maximum volume level is set to 20.
[LEVEL1]: Maximum volume level is set to 30.
[OFF]: Off.
Note
• This function is available only when [CONTROL
FOR HDMI] is set to [ON].
x [YC
You can select the type of HDMI signal output
from HDMI OUT jack.
[YC
C
B
[RGB]: The system outputs RGB signals.
Note
• If the playback picture becomes distorted, set
[YC
B
• If the HDMI OUT jack is connected to a component
with a DVI jack, [RGB] signals will be automatically
output even when you select [YC
C
/RGB (HDMI)]
B
R
]: The system outputs YC
R
C
] to [RGB].
R
C
signals.
B
R
C
].
B
R
Hide quick links:
Advertisement
Table of Contents
