Hdmi Settings Menu - Sony HT-M77 Operating Instructions Manual

x DUAL MONO
Lets you select the language you want
when you listen to the dual audio of a
digital broadcast when available. This
feature only functions for Dolby Digital
sources.
• MAIN/SUB: Sound of the main
language will be output through the front
left speaker and sound of the sub
language will be output through the front
right speaker simultaneously.
• MAIN: Sound of the main language will
be output.
• SUB: Sound of the sub language will be
output.
x PLII DEC.
Lets you turn the Pro Logic II decoding
mode on or off.
• AUTO: Applies the Pro Logic II
decoding mode automatically when
receiving the Dolby Surround encoded
signals.
• ON: Applies the Pro Logic II decoding
mode when receiving 2 channels signals.
• OFF: Pro Logic II decoding mode is
turned off.
Note
This function works only in the following cases.
– "MOVIE" is selected.
– Speaker layout settings is set to "STANDARD"
(page 12).

HDMI settings menu

You can adjust the required settings for
equipment connected to the HDMI jacks.
x CTRL HDMI
Lets you turn the Control for HDMI
function on or off. For details, see
""BRAVIA" Sync Features" (page 39).
x PASS THRU
Lets you output the HDMI signals to the
TV even when the receiver is in standby
mode.
• ON: When the receiver is in the standby
mode, the receiver continuously outputs
HDMI signals from the receiver's HDMI
TV OUT jack.
• AUTO: When the TV is turned on while
the receiver is in the standby mode, the
receiver outputs HDMI signals from the
receiver's HDMI TV OUT jack. Sony
recommends this setting if you use a
"BRAVIA" Sync compatible Sony TV.
This setting saves power in the standby
mode when compared with the "ON"
setting.
• OFF: The receiver does not output
HDMI signals when in the standby mode.
Turn on the receiver to enjoy the
connected equipment's source on the TV.
This setting saves power in the standby
mode when compared with the "ON"
setting.
Notes
• This parameter is not available when "CTRL
HDMI" is set to "CTRL OFF".
• When "AUTO" is selected, it may take a little
more time for the image and sound to be output
to the TV than when "ON" is selected.
• When the receiver is in standby mode,
"A.STANDBY" appears on the display if
"PASS THRU" is set to "AUTO" or "ON".
However, "A.STANDBY" will disappear when
"PASS THRU" is set to "AUTO" and no signals
are detected.
x AUDIO OUT
Lets you set the HDMI audio output from
the playback equipment connected to the
receiver via an HDMI connection.
• AMP: The HDMI audio signals from the
playback equipment are only output to
the speakers connected to the receiver.
Multi channel sound can be played back
as it is.
47
GB