Table of Contents
Advertisement
• Do not block the ventilation slots of the subwoofer (page 130).
• Do not place your hand on the speaker driver when lifting the subwoofer. Doing so, the speaker driver may be
damaged. When lifting, hold the foot of the subwoofer.
Speaker driver
Tip
• It is recommended to place the subwoofer on a hard floor.
• You can also place the subwoofer either side, facing the listening position.
• When you change the positions of the speakers, Sony recommends that you change the settings. For details, see
"Calibrating the Appropriate Settings Automatically" (page 97).
To install the speakers on a wall
Before installing the speakers on a wall, connect the speaker cord to the speaker.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to 3, and the speaker cord without the color tube to #.
1
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
30 mm
2
Fasten the screws to the wall.
For the center speaker
6 to 9 mm
Color tube
Front speaker (L): White
Front speaker (R): Red
Center speaker: Green
Surround speaker (L): Blue
Surround speaker (R): Gray
4 mm
265 mm
5 mm
10 mm
For the front and surround speakers
5 to 7 mm
Hole on the back of
the speaker
150 mm
17
GB
Hide quick links:
Advertisement
Table of Contents
