Sony DAV-F500 Operating Instructions Manual page 83

Establishing sound
transmission between the
S-AIR main unit and S-AIR sub
unit (ID setting)
For the surround amplifier
For the S-AIR receiver (not supplied)
Simply by matching the ID of the S-AIR main
unit and the S-AIR sub unit, you can establish
sound transmission. You can use multiple
S-AIR main unit by setting a different ID for
each component.
X/x,
To set the ID of the S-AIR main
unit
1
Press "/1.
The system turns on.
2
Press FUNCTION repeatedly until
"DVD" appears in the front panel
display.
3
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
4
Press X/x to select
then press .
The options for [SETUP] appear.
5
6
7
8
9
10
"/1
FUNCTION
S-AIR main unit
DISPLAY
S-AIR sub unit
Tip
• To confirm the current ID, perform Steps 1 to 7
above. When you pair the S-AIR main unit with the
S-AIR sub unit (page 85), [(PAIRING)] appears
beside ID on the display for selecting ID.
To set the ID of the surround
amplifier
1
[SETUP],
2
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
Press X/x to select [AUDIO SETUP],
then press .
The options for [AUDIO SETUP] appear.
Press X/x to select [S-AIR SETUP t],
then press .
Press X/x to select [ID], then press
Press X/x to select the desired ID, then
press .
You can select any ID (A, B, or C).
The confirmation display appears.
Press .
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
Other S-AIR main
unit
ID A
ID A ID A
S-AIR sub unit
Make sure that the SURROUND
SELECTOR switch of the surround
amplifier is set to SURROUND.
Set the S-AIR ID switch of the surround
amplifier to match the ID (A, B, or C) of
the S-AIR main unit.
.
ID B
ID B
S-AIR sub unit
83
GB