Step 5: Performing The Quick Setup - Sony DAV-F500 Operating Instructions Manual

Step 5: Performing the
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
Note
• When you connect the system and the TV with the
component video cord (not supplied) or HDMI cable
(not supplied), you need to set the type of video
output for matching your TV. For details, see "Setting
the type of video output to match your TV" (page 35).
C/X/x/c,
1
Turn on the TV.
2
Press [/1, and POWER on the surround
amplifier.
The system turns on.
Note
• Make sure that the function is set to "DVD"
(page 36).
3
Switch the input selector on the TV so
that the signal from the system
appears on the TV screen.
[Press [ ] to run QUICK SETUP.]
ENTER
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 34) and perform
again.
4
Press without inserting a disc.
The Setup Display for selecting the
language.
5
Press X/x to select a language.
The system displays the menu and subtitles
in the selected language.
6
Press
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
"/1
7
Press X/x to select the setting.
DISPLAY
x [16:9]
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode.
(page 90)
x [4:3 LETTER BOX] or [4:3 PAN
SCAN]
If you have a 4:3 standard TV. (page 90)
8
Press
9
Connect the calibration mic to the
ECM-AC2 jack on the control unit.
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
LANGUAGE SETUP
OSD:
MENU:
AUDIO: CHINESE 1
SUBTITLE: CHINESE 2
.
VIDEO SETUP
TV TYPE:
PROGRESSIVE
(COMPONENT OUT)
4:3 OUTPUT: 4:3 LETTER BOX
COLOR SYSTEM 4:3 PAN SCAN :
(VIDEO CD)
PAUSE MODE:
.
ENGLISH
ENGLISH
THAI
16:9
: 16:9
AUTO
33
GB