Calibrating The Appropriate Settings Automatically - Sony DAV-F500 Operating Instructions Manual

Calibrating the
Appropriate Settings
Automatically
[AUTO CALIBRATION]
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
automatically.
Note
• The system outputs a loud test sound when [AUTO
CALIBRATION] starts. You cannot turn the volume
down. Give consideration to children and neighbors.
• Make sure that the headphones are not connected to
the surround amplifier. You cannot operate the
following Steps with the headphones connected.
C/X/x/c,
1
Press FUNCTION repeatedly until
"DVD" appears in the front panel
display.
2
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
3
Press X/x to select
then press .
The options for [SETUP] appear.
4
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
5
6
7
FUNCTION
DISPLAY
[SETUP],
8
9
Press X/x to select [AUDIO SETUP],
then press .
The options for [AUDIO SETUP] appear.
Press X/x to select [AUTO
CALIBRATION], then press
The options for [AUTO CALIBRATION]
appear.
Connect the calibration mic (supplied)
to the ECM-AC2 jack on the control unit
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied).
The front of each speaker should face the
calibration mic, and there should be no
obstruction between the speakers and the
calibration mic.
Connector panel of
the control unit
C 2
M - A
E C
Calibration mic
Press C/c to select [YES].
Press .
[AUTO CALIBRATION] starts.
Be quiet during the measurement.
.
97
GB