Sony DAV-F500 Operating Instructions Manual page 25

To attach the stand cover and panel cover
After connecting the cables, bundle excess cables and attach the panel cover and stand cover.
Be sure to disconnect the AC power cords of all components from their wall outlets (mains) when
attaching the stand cover.
1
Bundle the cables on the rear of the control unit.
Thread the connected cable along through the stand (1), bundle the cables with the cable ties, in
the 2 positions, to the rear of the control unit (2), then lock the cable ties (3).
3
,
2
Store the excess portion of the cable ties into the space between the side walls of the
frame.
3
Attach the panel cover to the rear of the control unit.
Note
• Be sure to fully extend the FM wire antenna (aerial).
• After bundling the cables, keep the FM wire antenna (aerial) as horizontal as possible.
Tip
• If it is difficult to fit the cables into the slit, bundle the cables with the cable tie (supplied), then attach the panel
cover.
1
2
Bundle with cable tie
(supplied).
3
25
GB