Returning To The Default Settings - Sony DAV-F500 Operating Instructions Manual

Returning to the Default
Settings
Returning the system
parameters, such as preset
stations, to the default
settings
A.F.D. STD D.C.S.
"/1
1
Turn off the power.
2
Press and hold "/1 on the control unit
about 5 seconds.
"MEMORY CLR" and "PUSH POWER"
appear alternately in the front panel display
about 10 seconds.
3
Press "/1.
"CLEARING" appears in the front panel
display and the default settings are returned.
After "CLEARED!" appears, the system is
turned off.
Note
• In Step 3, if you do not press [/1 or press any buttons
other than [/1 on the control unit, the system turns
on. The setting is not made.
• When you turn on the system after returning to the
default settings, wait about 20 seconds before turning
on the power by pressing [/1.
VOL
FUNCTION
DVD HOME THEATRE SYSTEM DAV-F500
Returning the [SETUP] settings
to the default
You can return the [SETUP] settings (page 89)
other than [PARENTAL CONTROL] to the
default settings.
C/X/x/c,
1
Press FUNCTION repeatedly until
"DVD" appears in the front panel
display.
2
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
3
Press X/x to select
then press .
The options for [SETUP] appear.
4
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
5
Press X/x to select [SYSTEM SETUP],
then press .
The options for [SYSTEM SETUP] appear.
6
Press X/x to [RESET] and press c.
7
Press C/c to select [YES].
You can also quit the process and return to
the Control Menu display by selecting [NO]
here.
FUNCTION
DISPLAY
[SETUP],
107
GB