Sony DAV-F500 Operating Instructions Manual page 86

x After pairing
Sound transmission is established between the
paired unit and S-AIR sub unit(s) only.
Your room
S-AIR main unit
ID A
ID A
S-AIR sub unit
Pairing
To perform pairing
C/X/x/c,
1
Place the S-AIR sub unit that you want
to pair near the S-AIR main unit.
Note
• Remove headphones from the surround
amplifier (if connected).
2
Match the IDs of the S-AIR main unit
and the S-AIR sub unit.
• To set the ID of the S-AIR main unit, see
"To set the ID of the S-AIR main unit"
(page 83).
• To set the ID of the surround amplifier,
see "To set the ID of the surround
amplifier" (page 83).
86
GB
Neighbor
No transmission
ID A
S-AIR sub unit
FUNCTION
DISPLAY
• To set the ID of the S-AIR receiver (not
supplied), refer to the operating
instructions of the S-AIR receiver (not
supplied).
3
Press FUNCTION repeatedly until
"DVD" appears in the front panel
display.
4
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
5
Press X/x to select
then press .
The options for [SETUP] appear.
6
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
7
Press X/x to select [AUDIO SETUP],
then press .
The options for [AUDIO SETUP] appear.
8
Press X/x to select [S-AIR SETUP t],
then press .
9
Press X/x to select [PAIRING], then
press .
The confirmation display appears.
10
Press C/c to select [YES], then press
.
The S-AIR main unit starts pairing.
To not perform pairing, select [NO].
11
Start pairing of the S-AIR sub unit.
x For the surround amplifier
Press POWER on the surround amplifier to
turn on the surround amplifier and press
PAIRING on the rear panel of the surround
amplifier.
The PAIRING indicator of the surround
amplifier flashes red when pairing starts.
When sound transmission is established,
the PAIRING indicator of the surround
amplifier turns red and the confirmation
display appears.
Tip
• To press PAIRING on the rear panel of the
surround amplifier, a slim instrument, such as a
paper clip, can be used.
[SETUP],