Disc; Playing A Disc - Sony DAV-F500 Operating Instructions Manual

Sony dav-f500 dvd home theatre system
Hide thumbs Also See for DAV-F500:
Table of Contents

Advertisement

Disc

Playing a Disc

Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
"/1
H
Z
/
X
MUTING
VOLUME
+/–
1
Turn on your TV.
2
Switch the input selector on the TV to
this system.
38
GB
Disc slot
FUNCTION
Z
VOL +/–
"/1
FUNCTION
./>
H
/m/
M/
x
3
Press "/1.
The system turns on.
Unless the system is set to "DVD," press
FUNCTION to select "DVD."
"No Disc" appears in the front panel display
and the system is ready for loading the disc.
4
Load a disc.
Push the disc into the disc slot until the disc
is pulled in automatically.
Labeled side facing
to the front
The disc is drawn into the control unit
automatically.
5
Press H.
The system starts playback (continuous
play).
6
Press VOLUME +/– to adjust the
volume.
The volume level appears on the TV screen
and in the front panel display.
Note
• When the system is turned off, do not push a disc into
the control unit.
• Depending on the system status, the volume level
may not appear on the TV screen.
To turn the system off
Press "/1 while the system is on. The system
enters standby mode.
To save power in standby mode
Press "/1 while the system is on.
To enter power saving mode, make sure that the
system is in the following status.
– "DEMO" is set to "OFF" (page 28).
– [CONTROL FOR HDMI] is set to [OFF]
(page 66).
– "S-AIR STBY" is set to "OFF" (page 85).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents