Adjusting Adf Registration; Cannot Scan From A Computer - Lexmark XC9225 User Manual

Troubleshooting

Adjusting ADF registration

1
From the control panel, navigate to:
Settings > Maintenance > Configuration Menu > Scanner Configuration > Scanner Manual Registration
2
From the Print Quick Test menu, touch Start.
3
Place the Print Quick Test page on the ADF tray.
4
Touch Front ADF Registration or Rear ADF Registration.
Notes:
•
To align Front ADF Registration, place the test page faceup, short edge first into the ADF.
•
To align Rear ADF Registration, place the test page facedown, short edge first into the ADF.
5
From the Copy Quick Test menu, touch Start.
6
Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are different from the original document, then adjust Horizontal
Adjust and Top Margin.
7
Repeat step 5 and

Cannot scan from a computer

Action
Step 1
a
Turn off the printer, wait for about 10 seconds, and then turn it
back on.
b
Resend the scan job.
Can you send the scan job?
Step 2
a
Make sure that the cables between the printer and the print
server are secure.
For more information, see the setup documentation that came
with the printer.
b
Resend the scan job.
Can you send the scan job?
step 6 until the margins of the Copy Quick Test page closely match the original document.
Yes No
The problem is Go to step 2.
solved.
The problem is Contact
solved. support.
168
customer