Bag H - Team Losi XXX4 Graphite Plus Owner's Manual

Step H-1
Front Bumper Install
131
q
1. Holding the car upside-down, install the front Bumper (59) by
lining up the holes in the fork of the front Bumper with the holes in the
Chassis (46). It should rest on the front Diff Cover (62). Secure the
front Bumper by threading two 4-40 x 1/4" Flat Head Screws (132)
through the Chassis into the two holes in the back of the front Bumper
as indicated in Figure 70.
q
2. Thread two 4-40 x 3/8" Cap Head Screws (131) through the
front Bumper into the front Diff Cover.
Step H-2
Rear Bumper Install
134
q
1. Install the rear Bumper (60) by lining up the forks of the rear
Bumper with the back of the Chassis (46). Thread two 4-40 x 3/8" Flat
Head Screws (134) through the rear Bumper into the holes in the rear
Diff Cover (69), as indicated in Figure 71, and tighten.

BAG H

132
69
30
Figure 70
132
46
62
Figure 71
134
60
131
46