Starting Under Cold Conditions - Valtra T series Versu Operator's Manual

3. Operation
9. Set the cruise control values.
When the engine has started the cruise control pop-up view is displayed.
GUID-B95BC766-BA79-4531-8739-1425E774606E
•
OR
•
•
10. Use the driving pedal to control the engine speed.
IMPORTANT: Never race a cold engine.
After starting a cold engine, the glow indicator light can light up again. The
afterglow reduces white smoke and keeps the cold engine running smoothly.
3.3.2

Starting under cold conditions

To ensure a successful start under cold conditions, use the engine heater and
follow the instructions given.
IMPORTANT: If you start the engine when it is very cold, the indicator light for
blocked hydraulic filters can be lit. This indicates that the oil is going through the
bypass valve unfiltered.
IMPORTANT: Avoid using hydraulics until the oil has warmed up and the
indicator light is no longer lit.
IMPORTANT: Always use the engine heater when the temperature is below 0°C.
IMPORTANT: If you are driving the tractor for a short distance only, make sure
that the battery is charged enough to ensure starting.
NOTE: Use of the engine heater reduces the wear on the engine.
A5
Cruise
P
N
13.0
Cruise
2
Press the OK button or the selector for the predefined factory/user
settings shortly to restore the previously saved cruise control values.
NOTE: If you do not press any button within 15 seconds after starting the
engine, the previously saved cruise control values will be restored.
Press the right arrow button shortly to select the cruise control value
reset function.
Press the OK button or the selector for the predefined factory/user
settings shortly to set the cruise control values to zero.
C3
000
Cruise
AUTO 1
13 °C
Cruise
1
- 74 -