Table of Contents
Advertisement
2. Check the tyre pressures.
3. When larger front tyres are fitted, check and adjust the turning angles on both
sides with maximum inclination of the front axle.
4. Set the tyre parameter.
5. Calibrate the speed sensors.
6. Tighten the wheel nuts after a few hours of driving.
4.8.1.1
Setting the tyre parameter
You can set the tyre parameter with the tractor terminal.
NOTE: If tyres of different dimensions are fitted to the tractor after delivery, the
tyre parameter must be reset.
1. Press ESC button.
2. Navigate to the menu 2 with the up and down arrow buttons.
3. Press the right arrow button to enter the transmission settings view.
NOTE: When the power shuttle lever is in the parking brake position (P), you
can enter the transmission settings view by pressing the preprogramming
button.
4. Move the navigation box to the tyre parameter position with the arrow
buttons.
A short press moves the box in the selected direction one field at a time. A
long press moves the box in the selected direction continuously.
SET
GUID-B9AAD51A-1746-42FF-8BE1-112207CAE27B
5. Change the tyre parameter value with the up or down arrow button.
The value is automatically saved when you deactivate the selected field by
moving the navigation box to another parameter or by pressing the ESC
button.
With a short press of the ESC button you can return to the menu 2. A long press
of the ESC button returns to the previously active drive display.
3
START
3
904
START
RESET TO DEFAULT
- 375 -
4. Maintenance
Advertisement
Table of Contents
