Programming The Engine Speed Cruise Control; Activating And Deactivating The Engine Speed Cruise Control - Valtra T series Versu Operator's Manual

3.8.15.4

Programming the engine speed cruise control

GUID-FC2D34C7-2836-44A6-893A-C0B821296F4A
1. Engine RPM memory button
1. Set the engine speed.
Use the drive pedal or the hand throttle to set the desired engine speed
value.
2. Press the engine RPM memory button shortly.
The setting is activated and stored in the memory. The indicator light is
continuously lit.
NOTE: If the engine speed cruise control is active, the driving speed cruise
control does not activate. The engine speed cruise control has the priority
over the driving speed cruise control, so if the driving speed cruise control is
active and you activate the engine speed cruise control, the driving speed
cruise control deactivates.
3.8.15.5

Activating and deactivating the engine speed cruise control

NOTE: Control the position of the hand throttle before deactivating the cruise
control.
1
- 121 -
3. Operation