Administration - Luxul XAP-1030 User Manual

To allow devices to connect to any Luxul AP in Bridge Mode we recommend setting
a second SSID to allow client devices to connect. In the AP' s management page
select Wireless >> Settings, then select SSID 2 and confi gure the Client network.
NOTE:
This SSID must be different than the SSID used for the bridge
connection, and may match on the Bridge Root and Bridge
Client devices.

5.5 Administration

Administrator Login: Sets the password for Administrator access to the web
management interface. When connecting to the Access Point through the web
interface, the user is prompted for a User ID (this is always admin) and Password
(the default value is "admin"). It is HIGHLY recommended to change to a secure
password when initially confi guring the Access Point. To change the password,
simply enter the new password, confi rm the password, then click Save, and then
Reboot for the change to take effect.
After confi rming the desired Quick Setup confi guration settings, select Save and
then Reboot for the settings to take effect.
24
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
User Guide