Bridge Setup; Client Mode - Luxul XAP-1030 User Manual

User Guide
Bridge Root: Sets the AP into Bridge Root mode allowing Bridge Clients to

connect (regular client devices cannot connect to this mode)
Bridge Client: Sets the AP into Bridge Client mode allowing it to connect to a

Bridge Root (regular client devices cannot connect to this mode)
Network Name (SSID): Sets the name of the Wireless Network. If the SSID is not

set on a profi le, the name of the network will not be broadcast.
NOTE: Profi le 1 is set during Quick Setup
SSID Broadcast: This gives you the option to hid the Network Name only allow-

ing devices that already have the profi le saved to see and connect to the AP.
Security Mode: Sets the wireless security encryption mode.

Encryption: This fi eld only shows while in WPA mode. It is used to select the

encryption method WPA will use (default is TKIP & AES).
WEP Key: This fi eld only shows while in WEP mode. Allows the input of a 128 bit

WEP key.
WPA Passphrase: Sets the passphrase for wireless network access.

NOTE: If no Network Name (SSID) is specifi ed, the profi le is not active.

5.4 Bridge Setup

5.4.1 Client Mode

Client: Connects to an existing wireless network as a client device

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450 a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450
21 21 21