Luxul XAP-1030 User Manual page 16

When DHCP is enabled on the Access Point, the new IP address will be needed in
order to access the web management interface. The Router web interface can be
used to look up the IP address assigned to the Access Point. To Enable DHCP, click
on the drop down menu and select Enable. Select Apply and then Reboot for the
change to take effect.
NOTE: DHCP is set as Disabled by default and is the recommended
setting in order to ensure optimal communications with all Luxul
devices on the network.
IP Address: An IP address is a numerical label assigned to each device on the net-

work. This fi eld shows the IP address that is assigned to the XAP-1030. To ensure
plug and play capability with other Luxul networking products, the IP Address is
automatically defaulted to 192.168.0.12. If desired, the user can set this to a differ-
ent static IP Address. To change the IP address of the Access Point, simply type in
the desired IP address (the text fi eld will be red if the address is incomplete), click
Apply and then Reboot for the changed to take effect. When connecting to the
Access Point through the web interface, the NEW IP Address must be used.
NOTE: Each device on the same network must have a unique IP address.
If the Access Point is assigned an IP address already in use, it
will result in an IP address confl ict that will need to be resolved
manually. For optimal communications with all Luxul devices on
the network, it is recommended that IP addresses not be changed
unless absolutely necessary.
Subnet Mask: To ensure plug and play capability with other Luxul networking

products, the Subnet Mask is automatically defaulted to 255.255.255.0. If desired,
the user can set this to a different static Subnet Mask.
Default Gateway: A gateway is a router on the network that connects two or

more networks together. Typically the gateway (router) connects the local area
network (LAN) to the Internet. The Internet Service Provider (ISP) often provides
a physical device (usually a DSL modem or cable modem) that connects to the
gateway with an Ethernet cable, thus completing the link to the Internet. For
optimal connectivity and network functionality, this device could also be the
Luxul XBR-2300 Router.
Set the Default Gateway fi eld to the IP address of your network default gateway,
typically your router. The default gateway confi guration is set to the default IP
address of the Luxul XBR-2300 Router.
16
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
User Guide