Luxul XAP-1030 User Manual page 19

Commercial grade omni 802.11b/g/n wireless access point

Hide thumbs Also See for XAP-1030:

Table of Contents

User Guide

Basic Wireless Settings: This screen allows the modiﬁ cation of the following basic

settings for the wireless network:

Wireless Radio: This ﬁ eld is used to Enable and Disable the wireless network



and is set to Enabled by default. If the Radio is Disabled the Access Point will not

broadcast a wireless signal. To Disable the Wireless Radio, click the dropdown

menu, select Disabled, then click Save and then Reboot for the change to take

effect.

Wireless Mode: Sets the type of 802.11 wireless network to be broadcast.



Available modes are:

802.11g



802.11gn



The default setting is 802.11gn, and is recommended for optimal performance of

all types of devices in the network. Use the 11g Mode ONLY if there are 802.11b/g

client devices in the network that will not connect in 802.11gn Mode.

Channel Width: Sets the width of the 802.11n channel. Available widths are:



20MHz (available for both modes)



20/40MHz (only available for 802.11gn mode)



The default (and recommended) setting is 20 MHz to provide maximum perfor-

mance to all client devices and to avoid any potential client issues.

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450

19 19

Table of Contents

Show Quick Links

Table of Contents