Wireless; Basic Wireless Settings - Luxul XAP-1030 User Manual

Encryption: This fi eld sets the type of encryption to be used by the Security

Mode. The encryption options are dependent upon the Security Mode selected
and this fi eld only shows while in WPA mode. For WEP and WPA2, and WPA/
WPA2 Personal, encryption is automatically set to 128 bits, AES, and TKIP &
AES respectively. For WPA, there are three options: AES, TKIP, and TKIP & AES.
When set to WPA, it is recommended that TKIP & AES be used. To change the
Encryption, click the drop down menu and select the desired encryption type.
Once all options are selected, click Save and then Reboot for the change to take
effect.
WEP Key: This fi eld only shows while in WEP mode and sets the WEP key to be

used in the network. WEP 128 bit keys require 26 characters. Allowed characters
are numbers 0-9 and letters a-f. There are WEP key generators online that can
automatically create a key. To change the WEP Key, simply enter the 26 character
key then click Save and then Reboot for the change to take effect.
WPA Passphrase: This sets the passphrase used by client devices to connect to

the wireless network when using WPA Security Mode. For WPA the passphrase:
Must be a minimum of 8, maximum of 63 characters

Can contain spaces or special characters (i.e. @#$%&*)

To change the WPA Passphrase, simply type in the desired passphrase, click Save,
then Reboot for the change to take effect.
NOTE: It is recommended to use a strong password containing:




5.3 Wireless

5.3.1 Basic Wireless Settings

18
More than the minimum number of characters
One or more capital letters
Numbers and/or special characters
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
User Guide