Quick Setup - Luxul XAP-1030 User Manual

Commercial grade omni 802.11b/g/n wireless access point

Hide thumbs Also See for XAP-1030:

Table of Contents

User Guide

a. Be sure the XAP-1030 is properly installed and powered on

b. Open your Web Browser, and enter http://192.168.0.12.

The login window appears as shown below:

c. Enter the user name and password (default user name is "admin" and default

password is "admin"), and then click "OK" to login to the Quick Setup window.

5.2 Quick Setup

Quick Setup: For most installations, it is expected that the Quick Setup page will

be sufﬁ cient to optimally conﬁ gure and deploy the XAP-1030 Wi-Fi network. The

Quick Setup page consists of the following:

DHCP Client: Enabled or Disabled. DHCP (Dynamic Host Conﬁ guration Protocol)



is used to automatically assign an IP Addresses to a device on the network. If

DHCP is enabled on the Access Point, it will no longer use the static address set

by Luxul at time of manufacturing and will request a dynamic IP Address from the

Router (sometimes referred to as the Gateway).

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450

15 15

Table of Contents

Show Quick Links

Table of Contents