GT-12000
6.1 OVERVIEW
This chapter provides information necessary to keep the scanner function
in optimum condition constantly and to prevent troubles.
6.1.1 Cleaning
Perform cleaning when stain is noticeable. Stain on the document glass,
particularly, has direct effect on scanned image. Therefore, be sure to
clean the glass well to remove stain thoroughly.
CAUTION
Never apply any organic solvent such as thinner
and benzine , since these may deteriorate plastic
and rubber parts.
q Outer cases
Wipe stain off with a clean cloth which is moistened with water and
then squeezed tightly. To remove severe stain, use neutral detergent.
q Document glass
Remove dust and paper debris with a dry clean cloth. If stain is severe
or foreign matter is stuck, use a cloth absorbed with neutral detergent.
If trace is left, wipe it off well with a dry, clean cloth again.
CAUTION
If you need to clean the reverse side of the glass,
be sure to remove the glass using the specified
adjusting tools.
Rev. A
6.1.2 Lubrication
This scanner needs no lubrication at the level of service specified in the
service manual.
Maintenance
6-1